Instruction manual

M4. buffer size Buffer size in 1/10K ranges. The following table lists the configured buffer
sizes and min-max values for your printer. The printer’s configuration is
stored in non-volatile RAM and retained when you turn off the printer. The
max. value for each buffer is listed; however, the sum of all the buffers
cannot exceed the max. available memory of the printer.
Buffer Type 9825* 9855/9860
Transmit Volatile 2K (.5K- 4K) 64K (.5K- 128K)
Receive Volatile 8K (2K- 64K) 64K (2K- 128K)
Image Volatile 330K (41.5K- 640K) 330K (41.5K- 6144K)
Downld. Fonts Volatile 64K (8K- 640K) 64K (8K- 8192K)
Scalable Fonts Volatile 64K (32K-640K) 384K (32K-8192K)
Formats Volatile 64K (16K- 640K) 128K (16K- 1024K)
Internal NA cannot reallocate cannot reallocate
* The 9825, 9855, and 9860 printers do not have non-volatile RAM; however, you can store formats,
fonts, and graphics in flash memory. Change the storage device of your packets to “F” instead of “N.”
Use the following table to see how much memory is available to reallocate.
RAM* 9825 9855/9860
Volatile RAM 1 Meg 8 Meg
* You cannot reallocate more memory than what is available, or you will receive an error. Memory
expansion is an option available on the 9855 and 9860 printers.
Example {I,M,I,R,1530 p }
Stores the image buffer in volatile RAM and allocates 153K for it.
2-26 Configuring the Printer