Instruction manual

Defining the Memory Configuration Packet
Use the memory configuration packet (M) to customize the size of your
printer’s buffers, which gives you greater flexibility in your formats.
Memory must be allocated in 1/2K increments. The memory configuration
packet does not accept decimals, so enter whole numbers. Multiply the
amount to reallocate (in K) by 10. For example,
To reallocate (in K) Enter this amount
1 10
1.5 15
2 20
2.5 25
153 1530
229.5 2295
Each buffer’s allocated memory remains in effect until that buffer is
reallocated. For this reason, you may want to reallocate all the buffers
when reallocating any buffer. If you reallocate more memory than you have
available, you will receive an error.
Syntax {I,M,buffer,de vice,buffer_size p }
M1. M Memory Configuration Packet
M2. buffer Buffer type. Options:
D Downloadable Fonts
F Format
I Image
R Receive
T T ransmit
V Scalable (vector) fonts
M3. device Storage type. Options:
F Flash Memory
R Volatile RAM
Note: You cannot reallocate flash memory.
Configuring the Printer 2-25