Instruction manual

Defining the System Setup Packet
Use the system setup packet (A) to select the power up mode, display
language, print separators between batches, print a “slashed zero,” and
select the symbol set.
Syntax {I,A,powup_mode,lan guage,sep_on,slash_zero,
sym bol_set p}
A1. A System Setup Packet
A2. powup_mode Online Mode. Options:
0 online mode (default)
1 offline mode (9855/9860).
A3. language Display Language. Options
0 English (default)
1 French
2 German
3 Spanish - ES
4 Japanese
5 Portuguese
6 Italian
7 Swedish
8 Spanish2 - MX
9 Danish
10 Dutch
11 Finnish
12 Norwegian
A4. sep_on Batch Separators. Options:
0 Does not print a separator (default)
1 Prints a separator
2 Double-length separator- prints 2 tags (9855/9860)
Note: Do not use batch separators with continuous (non-indexed) supply
or RFID supply. If using a stacker, the batch separator is 3.66
inches long.
A5. slash_zero Slash Zero. Options:
0 Print a standard zero (default)
1 Print a zero with a slash through it
Configuring the Printer 2-9