Instruction manual

96-Bit RFID Data Field Samples
The following examples can be used for C1Gen1 and C1Gen2 (without
locking).
The 96-bit data that can be displayed using the printer’s Setup, RFID menu
for all these examples is the same: “313233343536373839303132.”
Refer to your RFID Multi-Protocol Application Notes for more information
about displaying what is programmed into an RFID tag.
ASCII HEX Sample
{F,2,A,R,E,400,400,"ASCIIHEX" p
T,1,50,V,10,10,0,1,1,1,B,L,0,0 p
X,2,24,0 p }
{B,2,N,2 p
1,"313233343536373839303132" p
2,"313233343536373839303132" p }
ASCII Hex data type is selected in the RFID Data Field and the batch data is
entered as ASCII Hex.
ASCII Sample
{F,2,A,R,E,400,400,"ASCII" p
T,1,50,V,10,10,0,1,1,1,B,L,0,0 p
X,2,12,1 p }
{B,2,N,1 p
1,"123456789012" p
2,"123456789012" p }
ASCII data type is selected in the RFID Data Field and the batch data is
entered as ASCII.
A-20 Samples