Instruction manual

Data Formatting Failures
Formatting errors indicate that a field will print incorrectly. After you have
checked the data stream and corrected the data, retransmit the format and
batch.
Note: For errors 571-622, the batch still prints, but the field, font, bar
code, or density may be incomplete, missing or contain incorrect
data.
Error
Code
Description
571 UPC or EAN bar code data length is invalid. The bar code data
length in the batch does not fit the format.
572 A copy field, padded field, or incrementing field length is invalid.
The field length in the batch does not fit the format or the field
contains blanks. Or, the fixed length field does not contain the
specified number of characters.
573 Price field length is invalid. The price field length in the batch
does not fit the format or the field contains blanks.
574 No CD scheme or room for CD. The CD scheme in the batch does
not fit the format or the field contains blanks.
575 The graphic included in your format could not be found. Resend
the graphic packet. If the error persists, call Technical Support.
600 The printer could not image the batch, because the batch was
refused. Call Technical Support.
601 An error occurred while the batch was imaging. Resend the
format, batch, font, and/or any graphic packets. If the error
persists, call Technical Support.
603 The batch was not found while imaging. Resend the batch packet.
If the error persists, call Technical Support.
611 Font, bar code or density is invalid. The font, bar code or density
in the batch does not fit the format.
Diagnostics and Errors 8-17