Instruction manual

417 Flash memory is full. Clear flash. Resend the format, graphic,
and check digit packets. If the error reappears, call Technical
Support.
420 Internal software list error. Call Technical Support.
421 Internal software list error. Call Technical Support.
422 Duplicate internal name. Call Technical Support.
423 Internal software error. Call Technical Support.
424 Internal software list error. Call Technical Support.
425 Internal software list error. Call Technical Support.
426 Internal software list error. Call Technical Support.
427
Format name is invalid. Valid name is 1 to 8 characters inside
quotes or “” for a printer-assigned name. Press ESCAPE/CLEAR
and try to continue. If the error reappears, call Technical Support.
428 Batch name is invalid or graphic not found. Press
ESCAPE/CLEAR and try to continue. If the error reappears, call
Technical Support.
429 A field number appears more than once in a format.
430 The format uses a graphic or verifier configuration packet that
cannot be found.
433 The batch references a field number that does not exist in the
format.
497 An error occurred during the loop back test on the parallel port.
Call Service.
499 An error occurred during the loop back test on the serial port.
Call Service.
8-16 Diagnostics and Errors