Instruction manual

263
Primary monetary symbol must be 0 (None), 1 (Dollar), 2 (Pound),
3 (Yen), 4 (Deutsche Mark), 5 (Franc), 6 (Peseta), 7 (Lira), 8
(Krona), 9 (Markka), 10 (Schilling), 11 (Rupee), 12 (Ruble), 13
(Won), 14 (Baht), 15 (Yuan), or 16 (Eurodollar).
264
Secondary symbol selection must be 0 (none) or 1 (print
secondary sign).
265
Monetary decimal places must be 0 to 3.
266
Character string length in the control characters packet must be 5
(MPCL control characters) or 7 (ENQ/IMD command character).
267
Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3
(9600), 4 (19200), 5 (38400), 6 (57600), or 7 (115200). Resend
the communication settings packet.
268
Word length selection must be 0 (7 bits), or 1 (8 bits). Resend the
communication settings packet.
269
Stop bits selection must be 0 (1 bit), or 1 (2 bits). Resend the
communication settings packet.
270
Parity selection must be 0 (none), 1 (odd), or 2 (even). Resend
the communication settings packet.
271
Flow control selection must be 0 (none), 1 (DTR), 2 (CTS/RTS), or
3 (XON/XOFF). Resend the communication settings packet.
272 Symbol set (code page) in the System Setup packet must be
0 (Internal), 1 (ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin
2), 5 (1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8 (1254-
Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11 (1257- Baltic),
12 (1258- Vietnamese), 13 (852- Latin 2), 14 (855- Russian), 15
(857- IBM Turkish), 16 (860- DOS Portuguese), 17 (Wingdings),
18 (Macintosh), 19 (Unicode), 20 (BIG5), 21 (GB), 22 (SJIS to
SJIS), 23 (GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).
273
Cut adjustment must be -300 to 300 dots.
282
RS232 Trailer string is too long. Use a maximum of 3 characters.
283
ENQ Trailer string is too long. Use a maximum of 3 characters.
8-12 Diagnostics and Errors