Instruction manual

Data Errors
Errors 001 to 499 are data errors. These errors are returned in response to
a J,3 request. See Chapter 7, “Status Polling,” for more information. A data
error indicates that incorrect data was received from the host, causing the
printer to ignore the entire print job. After checking the packet and
correcting the problem, transmit the print job again.
The following is a list of data errors. These errors occur because data in
the format, batch, check digit, font, or graphic packet is invalid.
Format Errors
Error
Code
Description
001
Packet ID number must be 1 to 999.
002
Name must be 1 to 8 characters (excluding non-printable control
characters) inside quotes. The range is 1 to 256 characters for
the 9855 XML-enabled printer.
003
Action must be A (add) or C (clear).
004 Supply length is invalid. See “Defining the Format Header” in
Chapter 3 for valid lengths.
005 Supply width is invalid. See “Defining the Format Header” in
Chapter 3 for valid widths.
006
Storage device must be F (Flash), R (volatile RAM), or T
(temporary for graphics).
007
Unit of measure must be E (English), M (Metric), or G (Dots). See
“Defining the Format Header” in Chapter 3 for more information.
010
Field ID number is outside the range 0 to 999.
011
Field length exceeds 2710.
012 Row field position is greater than the maximum stock dimension.
See “Defining Text Fields” in Chapter 3 for valid row lengths.
8-6 Diagnostics and Errors