Instruction manual

Installed Options Description
A Network Control Language (NCL)
B Battery
C Cutter (Knife)
H High Speed (12 ips)
L Smart Relay
P Peel mode
R RS-232 option (Keypad)
S Stacker
V Verifier
If You Receive an Error Message
Any time you receive a message that is not described in this manual, or the
recommended action does not solve the problem, call Technical Support.
Some errors are the result of communication problems. In this case, reset
your printer and reboot your computer. If you change any of the online
configuration packets, resend the format packet to the printer, so the
configuration changes take effect.
Reading an Error Label
An error label queues and prints when you press
FEED/CUT after a data error (0-499) occurs. The
error label contains the packet type, field type, line
number, and error number. The packet and field
type return the first letter after the { or p . A “?” is
returned if the letter cannot be determined. The
line number refers to which line in the packet the
error occurs. The error number is the three-digit
error code. Use this information to correct the
format, batch, font, check digit, graphic, or online
configuration packet.
The first label shows an error in line 8, which is a
constant text field within the format packet. The
error number is 18.
The second label shows an error in line 1 of the
batch packet. The error number is 101.
Diagnostics and Errors 8-3