Instruction manual

Incrementing Fields
In incrementing fields, the first number in the sequence must contain the
same number of digits as the highest number to be counted. For example,
to increment the numbers in a field from 1 to 999, enter the starting number
in the batch as 001.
Special Printing Considerations
Keep in mind the following special printing considerations when using a
9855 or 9860 printer.
9855 Printer
Print
Speed
Printing Printhead
Density
Knife Peel Mode Verifier
2.5/4.0/6.0 ips
direct
transfer
203/300 dpi supported supported supported
8.0 ips
direct
transfer
203/300 dpi not supported supported supported
10.0 ips
direct
transfer
203 dpi only not supported not supported supported
12.0 ips
direct
transfer
203 dpi only not supported not supported supported
* The minimum label feed length is 0.75 inches using 8, 10, or 12 ips printing. 94x5 emulation is not
supported using 300 dpi. The maximum supply and image length with the optional 300 dpi printhead
is 12.0 inches (305 mm). The recommended print speed using linerless supplies is 2.5 or 4.0 ips.
Contact your Monarch Representative for supply requirements in high temperature and high humidity
environments.
9855 RFID Printer
The RFID printer pauses while programming the RFID tag.
9860 Printer
Print
Speed
Printing Printhead
Density
Knife Verifier
2.5/4.0/6.0 ips
direct
transfer
203/300 dpi supported supported
8.0 ips*
direct
transfer
203/300 dpi supported supported
* The 9860 printer allows cutting 1.2 inch feed length tags at 8.0 ips; however optimal cut quality may
not be achieved.
Printing 6-13