Instruction manual

4. Type the following text field:
T,2,18,V,50,50,1,1,1,1,B,L,0,0,1 p }
You have created a format packet for your MPCLII printer. Now, a batch
packet must be created before you can print the format.
5. Type the following batch header, after the text field line:
{B,25,N,1 p
6. Type the following bar code data:
1,"02802811111" p
7. Type the following text field data:
2,"TEXT FIELD" p }
8. Save your file as SAMPLE.FMT.
9. Type MODE COM1:9600,N,8,1 at the DOS prompt if you are using serial
communications. This sets the communication parameters at your host.
These communication parameters must match those at your printer.
See “Setting Communication Parameters,” in Chapter 2, or your host’s
documentation for more information.
Printer Differences 1-3