Instruction manual

G4. device Graphic storage device:
F Flash (saved when the printer is turned off)
R Volatile RAM
T Temporary storageNote:
G5. units Unit of measure. For bitmapped graphics, G (dots) is the only valid option.
G6. row Distance between the bottom of the graphic image area and the first bitmap
line. This is usually 0, unless you want a fixed amount of white space
around the graphic image. See “Positioning the Graphic Image,” for more
information.
Printer Unit of
Measure
Row or
End Row
Column or
End Column
9825/
9855/
9860
English
Metric
203 dpi Dots
0-1599
0-4061
0-3246
0-399
0-1013
0-810
9855/
9860
English
Metric
300 dpi Dots
0-1199
0-3045
0-3597
0-399
0-1013
0-1197
9855RFMP/
9855HF
English
Metric
203 dpi Dots
300 dpi Dots
0-1299
0-3299
0-2637
0-3897
0-399
0-1013
0-810
0-1197
G7. column Distance between the left edge of the graphic image area and the left edge
of first bitmap line. This is usually 0, unless you want a fixed amount of
white space around the graphic image. See “Positioning the Graphic
Image,” for more information. Use the previous table for values.
G8. mode Imaging mode. Enter 0.
G9. “name” Graphic name (optional), 0 to 8 characters, enclose within quotation marks.
Example {G,99,A,R,G,0,0,0,"99Wire" p
Adds a graphic image identified by number 99 to volatile RAM. The graphic
uses dot measurement. The image will be placed according to the row and
column parameters in the graphic field. The imaging mode is 0 and the
image is called 99Wire.
Creating Graphics 5-13