Instruction manual

Within a Format
When you define the graphic field within your format, the row and column
parameters represent where on the format to place the graphic image.
If you are doing a compliance label, these
numbers are usually 0,0, because your
compliance label covers the entire supply. See
"Placing the Graphic in a Format," for a sample
compliance label.
If you are placing a graphic (a logo, for
example) within a certain area on your supply,
enter the starting position (bottom left corner) of
the graphic image.
This label shows the triangle “logo” beginning
(the bottom left corner) at 400, 75 as defined in
the graphic field.
Defining the Graphic Header
Every graphic packet must contain a graphic header. This is the first thing
you enter. It identifies and provides important measurement and formatting
information for the graphic. Bitmap, duplicate, next-bitmap, constant text,
line, and box fields follow the graphic header, if they are used.
Syntax {G,graphID,action,device,units,row,col,
mode,"name" p
G1. G Graphic Header.
G2. graphID Unique number from 1 to 999 to identify the graphic image.
G3. action Enter A to add the graphic to the printer.
5-12 Creating Graphics