Instruction manual

Option 62 (Bypass Bar Code)
This option allows the optional verifier to bypass (skip) bar code(s) on a
format. The verifier does not scan any bar code with Option 62 applied to it.
Syntax R,62 p
R1. R Option Header.
R2. 62 Option 62. The verifier does not scan the bar code associated with this
option.
Note: Adjacent bar codes on a format need to start and end on the same
row (be the same height). Also, both adjacent bar codes (or
neither bar code) must be scanned. However, do not apply Option
62 to all bar codes on a format or 764 errors appear.
The verifier's beam scans the entire width of the label. It cannot
scan half the label's width. The verifier errors if Option 62 is
applied to only ONE of the adjacent bar codes.
4-24 Defining Field Options
Option 62 can be applied to
any bar code on this format.
Option 62 must be applied to
BOTH adjacent bar codes.