Instruction manual

Option 21 (Define Extended Field Names)
This option defines names for each field in a format, which can be longer
than eight characters. This option is only available on the 9855
XML-enabled printer.
Syntax R,21,"field_name" p
R1. R Option Header.
R2. 21 Option 21.
R3. “field_name” Specifies the field name. Must be enclosed within quotations. The name
can be 1 to 256 characters, excluding non-printable control characters and
the quotation mark (“). This name must match the one specified in the
variable name attribute.
Example T,2,10,v,250,50,0,1,1,1,B,C,0,0,0 p
R,21,"SALEPRICE_FIELD" p
Defines the name for text field 2 as “SALEPRICE_FIELD.”
Option 30 (Pad Data)
You can add characters to one side of a field to “pad” the field. Padding
allows you to fill in the remaining spaces when the entered data does not fill
an entire field. If a variable length field is not completely filled with batch
data, this option fills the remaining positions in the field with the character
designated by Option 30.
Syntax R,30,L/R,"character" p
R1. R Option Header.
R2. 30 Option 30.
R3. L/R Indicates type of padding:
L Pad field on left side
R Pad field on right side
R4. “character” Pad character must be within the 0 to 255 decimal range and enclosed
inside quotation marks. The pad character must be in the same format
specified in the RFID Data Field. See “Defining the RFID Data Field” for
more information. Do not use on fixed length fields.
4-14 Defining Field Options