Instruction manual

Printing 8-7
Special Printing Considerations
Keep in mind the following special printing considerations.
Maximum
Print Speed
Printing Method
Printhead
Density
Knife Peel Mode
2.5/4.0/6.0
ips (inches
per second)
Thermal Direct
Thermal Transfer
203/300 dpi
dots per inch
Supported Supported
8.0 ips
Thermal Direct
Thermal Transfer
203/300 dpi
Not
Supported
Supported
10.0 ips
Thermal
Direct/Thermal
Transfer
203 dpi only
Not
Supported
Not Supported
12.0* ips
Thermal
Direct/Thermal
Transfer
203 dpi only
Not
Supported
Not Supported
*12.0 ips is the high speed option, which must be purchased separately.
♦ The minimum label feed length is 0.75 inches (19 mm) using 8.0 ips or
higher.
♦ 94x5 emulation is not supported using 300 dpi.
♦ The maximum supply and image length with the optional 300 dpi
printhead is 12.0 inches (305 mm).
♦ You may need to clean the printhead and platen roller more frequently
when printing at high speeds. See Chapter 9, "Care and Maintenance,"
for more information.