Instruction manual

Setting Defaults 6-9
Ignore Configuration
With version 5.2 or greater software, you can ignore all online configuration
packets. If the printer receives data from a host system or software package
that includes online configuration packets with the format, those online
configuration packets can be ignored. Ignoring these packets is useful when
you cannot change your host’s data or when you want the printer to operate
as specified through the printer’s menu.
Note: We recommend changing your host’s data stream, but if that is not
possible, enable this option.
Use caution if ignoring online configuration packets, because the
printer may need the configuration for proper operation.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press » or ¼ until you see
DEFAULTS
» Ignore Config
2. Press Enter/Pause. The current setting is displayed, for example:
IGNORE CONFIG
Disabled ¼
3. Press » or ¼ until you see the option you want. Then press
Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.