Instruction manual

Designing Bitmapped Images
Once you determine the encoding method to use, you can begin
mapping out your graphic image.
Note:
The image that you map must be an upside down mirror
image of the final result.
Special Considerations
Solid black print cannot exceed 30% of any given square inch of the supply. If the black print
exceeds this limit, you may lose data or damage the printhead.
In the first label, the large “M” logo and thick black line exceed the allowed black to white print
ratio. In the second label, the large “M” logo does not exceed the black to white print ratio.
Exceeds
limit
Exceeds
limit
Does not
exceed
limit
Does not
exceed
limit
0.5”
2 inches
2 inches
5-2 Packet Reference Manual