Instruction manual

L7. thickness Using the chart below for reference, write the line thickness (1 to 99) in box L7.
Line thickness fills upward on horizontal lines, or to the right on vertical lines.
Measured in dots.
L8. “pattern” Line pattern. Enter "".
Example L,S,110,30,110,150,10,"" |
Defines a horizontal line field as a segment starting at row 110, column 30 and ending at row
110, column 150. The line thickness is 10 dots.
Defining Box Fields
Use boxes to form borders or highlight items of interest. Define each box field separately.
This field is not assigned a field number, but is counted as a field (keep this in mind, as the
printer allows a maximum of 200 fields per format). You can define any line length and a
thickness up to 99 dots, as long as the solid black print does not exceed 30 percent of any
given square inch of the label.
Syntax Q,row,column,end row,end col,thickness,"pattern" |
Q1. Q Box (Quadrilateral) Field.
Q2. row
Distance from bottom of print area to lower left corner of
box.
English 0 – 1200
Metric 0 – 3045
Dots 0 – 2436
Q3. column Distance from left edge of print area to lower left corner of
box.
English 0 – 189
Metric 0 – 479
Dots 0 – 383
Defining Fields 3-19