Instruction manual

3-14 Packet Reference Manual
B13. type Select from the bar code family. This parameter only applies to the GS1 DataBar
bar code. For other bar codes, do not include this parameter. Options:
1 GS1 DataBar 14 (default)
2 GS1 DataBar 14 Truncated
3 GS1 DataBar 14 Stacked
4 GS1 DataBar 14 Stacked Omni directional
5 GS1 DataBar Limited
6 GS1 DataBar Expanded
7 UPCA
8 UPCE
9 EAN13
10 EAN8
11 UCC/EAN128 and CC A/B
12 UCC/EAN128 and CC C
B14. sep_height Height of the separator between the linear bar code and 2D bar code. This
parameter only applies to the GS1 DataBar bar code. For other bar codes, do not
include this parameter. The value is 1 or 2. The default is 1.
B15. segment Width of the segment. This parameter only applies to the GS1 DataBar bar code.
For other bar codes, do not include this parameter. The range is even numbers
from 2 to 22. The default is 22.
Example B,3,12,V,50,40,1,2,80,7,L,0 |
Defines a bar code field (field #3) with 12 characters of variable length starting at row 150,
column 40. A UPCA bar code with a density of 2 and a height of 80 is used. The check digit
and number system are shown at the bottom. The bar code is left aligned without any field
rotation.
Example B,1,30,V,5,5,38,4,0,0,L,0,1,2,22 |
Defines a bar code field (field #3) with up to 30 characters of variable length starting at row 5,
column 5. The GS1 DataBar uses a density of 4. No text is shown with the bar code. The bar
code is left-aligned with no field rotation.