Instruction manual

See the following graphic for a representation of the following adjustments: dispense position,
backfeed distance, supply position, print position, and margin position.
Defining the Memory Configuration Packet
Use the memory configuration packet (M) to customize the size of your printer’s buffers, which
gives you greater flexibility in your formats.
Memory must be allocated in 1/2K increments. The memory configuration packet does not
accept decimals, so enter whole numbers. Multiply the amount to reallocate (in K) by 10. For
example,
To reallocate (in K) Enter this amount
1 10
1.5 15
2 20
2.5 25
153 1530
229.5 2295
Each buffer’s allocated memory remains in effect until that buffer is reallocated. For this
reason, you may want to reallocate all the buffers when reallocating any buffer. If you
reallocate more memory than you have available, you receive an error.
Syntax {I,M,buffer,device,buffer_size | }
M1. M Memory Configuration Packet
M2. buffer Buffer type. Options:
D Downloadable Fonts
F Format
I Image
R Receive
T Transmit
V Scalable (vector) fonts
2-14 Packet Reference Manual