Instruction manual

8-6 Packet Reference Manual
Error Description
Code
211 Narrow element value is less than 1 or greater than 99. Correct the value and resend
the format to the printer.
212 Wide element value is less than 1 or greater than 99. Correct the value and resend
the format to the printer.
213 Dimension must be 1 to 30 for a column or 3 to 90 for a row on a PDF417 bar code.
214 Truncation code must be S (standard) or T (truncated bar code).
215 Aspect code must be C (columns) or R (rows).
216 Option definition must be S (set) or T (template).
217 Input device device must be D (Default), H (Host), K (Keyboard), N (None), or S
(Scanner).
218 Pad direction must be L (from left) or R (from right).
219 Pad character is outside the range 0 to 255.
220 Check digit selection must be G to generate check digit.
221 Primary or secondary price format is outside the range 1 to 16.
222 Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
224 Bar code intercharacter gap must be 0 to 99 dots. (This is also known as the
additional character gap when using Option 50, Defining Bar Code Densities.)
Online Configuration Errors
Error Description
Code
251 Power up mode must be 0 (online).
252 Language selection must be 0 (English), 1 (French), 2 (German), or 3 (Spanish-ES).
253 Batch separator code in a system setup packet must be 0 (off).
254 Slash zero selection must be 0 (standard zero) or 1 (slashed zero).
255 Supply type must be 0 (black mark), 1 (die cut), or 2 (continuous).
256 Printhead energy selection must be 0 (standard supplies), 1 (fax paper), or 2
(linerless/synthetic supplies).
257 Feed mode must be 0 (continuous) or 1 (on-demand, if the option is available).
258 Supply position must be -99 to 99 dots.
259 Contrast adjustment must be -28 to 40 dots.
260 Print adjustment (position) must be -99 to 99 dots.