Specifications

Configuring the 802.11b/g and IP Settings 2-13
Setting the SSID
This option sets the SSID. The SSID is case-sensitive.
1. From the Configure menu, select SSID.
SSID
ABC 1234
E R +
Use A as shown in the following table:
E
Press A to
R
Press A to
+
Press A to
Saves the setting
Scrolls through the
positions from left to right
Increments the current
position setting by 1 and
scrolls through
alpha/special characters
2. When the setting you want is displayed, press A under E to save the
setting. You return to the Configure menu.
Setting the Command Escape Character
This option allows you to set or view the Command Escape Character (CEC).
Run-time messages from the radio begin with the CEC and the default is the
pound sign (#), which has a decimal value of 35. You may need to change
the default CEC character if it conflicts with other data, because an
unexpected operation could occur. The range is a decimal value between 1
and 255.
1. From the Configure menu, select Escape.
Escape Char
+ 35
E R +
Use A as shown in the following table:
E
Press A to
R
Press A to
+
Press A to
Saves the setting
Scrolls through the
positions from left to right
Increments the current
position setting by 1