Specifications

2-12 System Administrator’s Guide
Setting the Protocol
This option sets the protocol.
1. From the Configure menu, select Protocol: TCP or LPD.
Protocol
 TCP
X LPD
E U D
2. Use A under D to select the protocol you want. For example, if you
select LPD, you must specify a raw printer port:
Port
+ 09100
E U +
Use A as shown in the following table:
E
Press A to
R
Press A to
+
Press A to
Saves the setting
Scrolls through the
positions from left to right
Toggles between + or –;
also
increments the current
position setting by 1
3. Press A under E to save the setting. You return to the Configure menu.