Specifications

Configuring the 802.11b/g and IP Settings 2-1

CONFIGURING THE 802.11B/G

AND IP SETTINGS

Configuring the Print Server

To configure the print server for an 802.11b/g wireless network, you must set

the wireless mode (Ad-Hoc or infrastructure), SSID, channel (Ad-Hoc mode

only), data rate and security. All nodes of a wireless network need to have

the same settings to communicate with each other.

There are several ways to configure your print server. You can

 send console commands using a utility such as Monarch® NetManager.

See “Installing the Software” for NetManager information.

 use a Web browser. See Chapter 4, “Using a Web Browser” for more

information.

 use the Paxar Sierra Sport Configurator with Avalanche. See Chapter 5,

“Using the Paxar Sierra Sport Configurator” for more information.

 use Telnet. See Chapter 6, “Telnet Console Commands” for a list of

supported commands.

 select the RF Network menu using the printer’s Tool Box. See “Setting

Up Using the RF Network Menu.” The Tool Box allows you to do basic

setup.