User manual

22 •
••
• Drive Cable Replacement Procedure Users Manual LOKPRINT™ II
Drive Cable Replacement
Procedure
Installing the Drive Cable at the Capstan
STOP SLEEVE GROOVE
CAPSTAN
STOP SLEEVE
BACK OF MACHINE
FRONT OF MACHINE
BOTTOM VIEW
4
3
2
CABLE
RIGHT SIDE
CABLE
LEFT SIDE
1
1: Feed the drive cable in from left hand side and wind around the Capstan five
times, starting from the top and working down to the bottom.
2: Wrap the Drive Cable into the Stop Sleeve Groove so that the Stop Sleeve fits.
3: Once the Drive Cable exits the Stop Sleeve Groove, wrap the Drive Cable around
the Capstan again.
4: Continue feeding the Drive Cable forward to the right side and around the Drive
Cable pulleys on the machine.