Instruction manual

Using Edit Mode 4-1

USING EDIT MODE

This chapter tells you how to

♦ enter and exit Edit Mode.

♦ add or remove product buttons.

♦ edit product descriptions.

♦ edit category buttons

♦ edit category label formats

♦ edit product button tab names

Note: Edit Mode is only for Managers and Supervisors.

Entering Edit Mode

You can make changes to the product buttons. On the printer, use Edit mode or on your PC,

use the Edit Utility (see Chapter 5, “Using the Edit Utility”).

To use Edit Mode:

1. Press the Tools button.

2. Press Admin.

3. Enter the Admin password then press Enter. The default password is 1234.