Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
97
Label eject mode
AP7.t
¯ Only works with TCS - not with Cutter 2000.
No The last label of the printjob is not ejected.
The labels remaining in the printer can be fed out:
– manually by pressing the Feed key several times in offline mode or
– automatically with the next printjob
Yes, at jobend The last label of the print job is ejected.
If the last label of a printjob is not followed by a further printjob, it is cut and
stacked immediately. The first label of the following printjob will stay blank,
because it will have already passed the printhead at the time the new printjob
starts.
Head lift autom.
AP7.t
Triggers a short lifting of the printhead after each printing of x labels. Appli-
cation: Prevents wrinkling of foil and label web in case of very wide, fully print-
ed label material. By lifting the printhead in regular intervals, foil and material
can rearrange wrinklefree.
after x labels Setting range: 0-10; Default setting: 0
Head clean
AP7.t
After activating this parameter, the display shows:
Pressing the cut button now swivels the printhead down onto the print roller,
as long as the button stays pressed. Application: Function can be used for
cleaning the printhead.
P Detailed information about cleaning the printhead: User manual, topic section
Maintenance & Cleaning .
Head clean
Press cut key