Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters

AP 4.4 – AP 5.4 – AP 7.t

Command ^MT

AP4.4 AP5.4 AP7.t

Disable The material type sent in the MLI printjob is ignored (thermo-transfer or ther-

mo-direct).

Enable The material type is not ignored.

Label Invert

AP4.4 AP5.4 AP7.t

Rotates the printout by 180°. Equals the parameter PRINT PARAMETERS >

Print direction

, which will be ignored, when MLI printjobs are printed.

[17] Orientation of the printout: Setting „Disable“ (A) or „Enable“ (B).

Disable The label is printed with „normal“ orientation [17A].

Enable The label printout is rotated by 180° [17B].

Command ^JM

AP4.4 AP5.4 AP7.t

¯ Interpreter version: 1.32 or higher

The ^JM command changes the printer resolution:

y ^JMA sets the resolution to the default value = printhead resolution.

y ^JMB sets the resolution to 200dpi, if the actual resolution is 300 dpi. If the

actual resolution is 200dpi, this command is ignored.

Disable The resolution setting sent in the MLI printjob is ignored.

Enable The resolution setting is not ignored.

Printer

Printout