Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
94
Resolution
AP4.4 AP5.4 AP7.t
Print resolution in dpi. A 200 dpi graphic printjob can be printed with a 300 dpi
printhead.
xxx DPI Setting range: 200/300 dpi; Default: 300 dpi;
Error Indication
AP4.4 AP5.4 AP7.t
Selects the way, in which the printer responds in the event of error occuring
during printing.
Error Checking
AP4.4 AP5.4 AP7.t
Enables or disables error checking, when the printer is handling print fields.
YES Error checking is enabled. (Default)
NO Error checking is disabled.
Image Save Path
AP4.4 AP5.4 AP7.t
Selects the memory to be used by the ^IS and ^IL commands.
¯ Interpreter version: 1.10 or higher.
CF Card Optional CompactFlash card
Internal RAM The printer´s internal RAM. (Default)
Command ^PR
AP4.4 AP5.4 AP7.t
Disable The print rate sent in the MLI printjob is ignored.
Enable The print rate is not ignored.
Error
Level
Setting
LOW HIGH OFF
0 Ignore Ignore Ignore
1 Ignore Flash on the display Ignore
2 Prompt user for action Prompt user for action Ignore
[10] Error handling settings.
Low
High
Off