Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
89
REWINDER PARA
Rewind direction
AP5.4
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
(Internal) Rewinder rotation direction
Printing inside The label face shows inwards, when the label stock is wound up.
Printing outside The label face shows outwards, when the label stock is wound up.
Start mode
AP5.4
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Application mode  on page 83.
Current mode
AP5.4
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Current mode  on page 85.
Min. rew. current
AP5.4
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Min. rew. current  on page 85.
Max rew. current
AP5.4
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Max. rew. current  on page 86.