Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
55
DHCP host name
AP5.4 AP7.t
Host name of the printer. Default setting: „Device name“ + the last 3 figures
of the MAC adress.
Typing in the host name at the operating panel:
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
Acknowledge by pressing the Online button.
¯ Valid characters: A-Z, a-z, 0-9, -
3. Type in the next character.
4. Acknowledge the new password by pressing the Online button.
¯ Alternatively, the password can be typed in using a keyboard, or via the
web server.
WLAN SSID
AP5.4 AP7.t
¯ Only with plugged-in WLAN CF-card
A Service Set Identifier (SSID) is the identification of a radio frequency net-
work, which is based on IEEE 802.11.
Each WLAN owns a configurable SSID, by which the network is identified.
The SSID is the name of the network.
The SSID character string is configured in the base station (Access Point) of
the WLAN. It must be also configured on all clients, which are supposed to
access the access point. The SSID is attached uncoded to all pakkets to
identify them as part of that network.
xxxxxxxxxxx… The SSID consists of a maximum of 32 alphanumeric characters. Default set-
ting: „avery“
P Detailed information about using the WLAN feature: read the user manual,
topic section Advanced Applications .
WLAN WEP
AP5.4 AP7.t
¯ Only with plugged-in WLAN CF-card
WEP („Wired Equivalent Privacy“) is an encryption scheme for WLAN.
Disabled (Default setting) Communication with the host is not encoded.
64Bit key Communication with the host is encoded using 64 Bit WEP encoding.
128Bit key Communication with the host is encoded using 128 Bit WEP encoding.