Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
49
> CENTRONICS
PnP function
AP4.4 AP5.4 AP7.t
Off The printer doesn´t send any identification signals to the Centronics port.
On The printer sends identification signals via the Centronics port (if any is
connected) to the host computers Windows operating system. Windows will
search for an appropriate driver. (Default setting).
> NETWORK PARAM.
IP addressassign
AP5.4 AP7.t
¯ A change of this parameter setting forces a printer restart.
Fixed IP address This setting activates the parameters "Net mask" and "Gateway address"
(see below).
DHCP IP address is assigned automatically. The assigned IP address is displayed
for a moment on the printer display, while the printer is starting.
IP address
AP5.4 AP7.t
xxx.xxx.xxx.xxx Setting range per xxx value: 0 to 255
Change between the digits by pressing the Cut or Feed button; Acknowledge
the setting by pressing the Online button. After a change of the IP address,
the printer will reset automatically.
Net mask
AP5.4 AP7.t
xxx.xxx.xxx.xxx Setting range per xxx value: 0 to 255
Depending on the set IP address appears a default value.
¯ We recommend to use the default value!