Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
46
Data synch.
AP4.4 AP5.4 AP7.t
Data synchronisation at the serial interface.
RTS/CTS Data synchronisation through hardware
XON/XOFF Data synchronisation through software
None Handshake signals are ignored
Frame error
AP4.4 AP5.4 AP7.t
Display (Default) An error message is displayed, if a framing error is detected while
the printer is receiving serial data.
Ignore Framing errors will be ignored, no error messages are displayed.
> COM2 PORT
¯ This menu only appears, if the optional I/O board is installed.
Baud rate
AP4.4 AP5.4 AP7.t
¯ With mounted and connected I/O board only.
P See parameter Baud rate  on page 45.
No. of data bits
AP4.4 AP5.4 AP7.t
¯ With mounted and connected I/O board only.
P See parameter No. of data bits  on page 45.
Parity
AP4.4 AP5.4 AP7.t
¯ With mounted and connected I/O board only.
P See parameter Parity  on page 45.