Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
33
Material length
AP4.4 AP5.4 AP7.t
The material length (label length) is the distance between the gaps, meas-
ured from the front edge (beginning) of a label to the front edge of the next
label.
¯ The value is overwritten by the appropriate Easy Plug command when
sending label formats.
xxx mm Setting range: 5 mm to "max. length entry"; Unit interval: 0.1 mm
Default setting: 100 mm
Maximum length entry: dependent on the print head width and memory con-
figuration.
Material width
AP4.4 AP5.4 AP7.t
Zero position of the left border. If the printer is working in line-printer mode,
alterations can be made in millimetre units.
xxx mm Setting range: "min. width" to "max. width"; Unit interval: 0.1 mm
Default setting: 100 mm
y Min. width: dependent on the printer type
y Max. width: dependent on print head width and memory configuration.
P For detailed material width information, refer to topic section „Specifications“.