Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
21
PRINT INFO
¯ Printing of individual reports can be deactivated for certain options (e. g.
for the infeed option).
A material width of 100 mmis necessary to print the reports. The status print-
out is approx. 200 mm long.
Printer status
AP4.4 AP5.4 AP7.t
A protocol can be printed to get an overview of customer-specific parameter
settings (three pages, see [1]).
¯ Which parameters are listed, depends on the printer type.
[1] Three pages printer status printout with a 64-05 with firmware version 2.46.
Listed items: y Systemversion:
– Shows the installed firmware version as well as the release date of this
version.
– Firmware version: R = firmware RISC processor, H = firmware
H8 processor.