Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
114
Total head moves
AP4.4 AP5.4 AP7.t
¯ Only with mounted and activated cutter.
Shows the counter for every up and down movement of the printhead. Maxi-
mum value: 4 billions.
Head strobes
AP4.4 AP5.4 AP7.t
Shows the counted head strobes, which are a measure for the service life of
the printhead. A strobe is counted for each line in which at least one dot ist
printed. Maximum value: 4 billions.
Head temperature
AP4.4 AP5.4 AP7.t
Shows the current printhead temperature in °C.
Foil diameter
AP4.4 AP5.4 AP7.t
Shows the calculated foil diameter: A measurement routine calculates the ac-
tual ribbon roll diameter with an exactness of 7.5%.
The parameter
SYSTEM PARAMETER > Foil end warning can be used to set a critical
foil roll diameter. If the foil roll diameter equals this value, a message appears
on the printer display.
P See parameter Foil end warning  on page 60.
64-xx, DPM / PEM, ALX 92x:
At the (optional) USI is set a signal indicating the near foil end (additionally to
the display warning).
Dispensing cycl.
(Dispensing cycles)
AP5.4
¯ 64-xx/AP 5.4: Dispenser version only.
Shows the number of dispensed labels.
Operation time
AP4.4 AP5.4 AP7.t
Shows the elapsed time since the last switch-on of the machine.