Service manual

09/09 Rev. 5.03-01 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 4.4 – AP 5.4 – AP 7.t
112
Peripheraldriver
AP5.4 AP7.t
¯ AP 5.4: Only with mounted (optional) peripheral output stage board.
Applied PIC version on the output stage board driving the peripheral motor.
Intern. rewinder
(Internal rewinder)
AP5.4
¯ „AP 5.4 peripheral with internal rewinder“ only.
Applied PIC version on the internal rewinder motor output stage board.
> OPERATION DATA
Serv. operations
AP4.4 AP5.4 AP7.t
Shows the num+ber of service operations. The counter is increased by call-
ing the parameter
SERVICE FUNCTION > Service = yes. Maximum value: 4 billions.
Headnumber
AP4.4 AP5.4 AP7.t
Shows the number of printhead changes. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange = yes. Maximum value: 4 bil-
lions.
Roll number
AP4.4 AP5.4 AP7.t
Shows the number of exchanged print rollers. The counter is increased by
calling the parameter
SERVICE FUNCTION > Roller exchange > yes. Maximum value:
4 billions.
Cutter number
AP5.4 AP7.t
¯ Only with mounted and activated cutter.
Shows the number of exchanged cutters. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange =yes. Maximum value:
4 billions.