Service manual

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
78
REWINDER PARA
¯ This menu appears only in AP 5.4/5.6, and only, if SYSTEM PARAMETER >
Periph. device is set to „Intern Rewinder“.
Rewind direction
AP5.4 AP5.6
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
(Internal) Rewinder rotation direction
Printing inside The label face shows inwards, when the label stock is wound up.
Printing outside The label face shows outwards, when the label stock is wound up.
Current mode
AP5.4 AP5.6
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Current mode  on page 116.
Min. rew. current
AP5.4 AP5.6
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Min. rew. current  on page 117.
Max rew. current
AP5.4 AP5.6
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Max. rew. current  on page 117.
Start rew. curr.
AP5.4 AP5.6
¯ Only in production mode.
¯ Only if SYSTEM PARAMETER > Periph. device = „Intern Rewinder“.
P See parameter Start rew. current  on page 118.