Service manual

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
61
Font downl. area
AP5.4 AP5.6
If speedo-fonts are supposed to be used, they have first to be copied to a re-
served RAM disk area. Use parameter „Font downl. area“ to reserve the RAM
disk area in the required size.
The size of the required RAM disk area depends on the size of the font files
to be loaded.
¯ Mind to reserve a big enough RAM disk area!
There are two ways to copy the font files to the RAM disk:
y Copy from SD-card:
The font files must be placed in a folder named \fonts on the SD-card during
system startup. The files must be named fontxxx.spd (xxx = No. from 200 up
to 999).
P For details refer to the „Plugin-card manual“, topic section „Application“, para-
graph CF/SD-cards .
y Copy via Easy Plug command #DF (download file).
P More information: manual „Easy Plug“, subject section Description of Com-
mands .
xxx KBytes Setting range: 128KBytes to the maximum size, which depends on the mem-
ory configuration and allocation of the printer; Unit interval: 128 KBytes; De-
fault setting: 256 KBytes
¯ Switching the printer off extinguishes the memory content! Fonts, logos
etc., which were loaded on the RAM disk, must be loaded again after
switching the printer off.