Service manual
Table Of Contents
- General Information
- Operating the parameter menu
- Overview Parameter Menus
- Alphabetical Parameter List
- PRINT INFO
- PRINT PARAMETERS
- INTERFACE PARA
- SYSTEM PARAMETERS
- Foil end warning
- Foil warn stop
- Print Interpret.
- Character sets
- Character filter
- Light sens. type
- Head-sensor dist.
- Sens. punch-LS
- Foil mode
- Turn-on mode
- Error reprint
- EasyPlug error
- Single job mode
- Head resistance
- Temp. reduction
- Thin line emphas
- Voltage offset
- Miss. label tol.
- Gap detect mode
- Periph. device
- Singlestartquant
- External signal
- Start print mode
- Print contrast
- Ram disk size
- Font downl. area
- Free store size
- Print info mode
- Reprint function
- Language
- Keyboard
- Access authoriz.
- Realtime clock
- I/O BOARD
- DISPENSER PARA
- REWINDER PARA
- MLI PARAMETERS
- SPECIAL FUNCTION
- SERVICE FUNCTION
- SERVICE DATA
03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
46
FTP server
AP5.4 AP5.6
The File Transfer Protocol (FTP) server (RFC959) allows access to the inter-
nal RAM disk of the printer and, if available, to the memory card. The FTP
server is capable of multisession mode, without evaluating the user name
when logging in. The password must match the set password (see below).
P For further information read the user manual, topic section „Advanced Appli-
cations“, chapter „Data transmission with FTP“.
Enabled Switches the FTP server on.
Disabled Switches the FTP server off.
FTP password
AP5.4 AP5.6
¯ Parameter only appears in production mode.
Input of the FTP server password by means of a connected keyboard or the
printers operation panel. Default setting: „avery“.
Changing the password:
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
Acknowledge by pressing the Online button.
3. Put in the next character.
4. Acknowledge the new password by pressing the Online button.
¯ If a keyboard is connected, this can be used for typing in the password.