User manual

ManualsBrandsAvery Dennison ManualsBusiness equipmentAP5.4 Gen II

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

#G-------------------------------------------------------------------

---

#G I/O Board Parameter Menu

#G-------------------------------------------------------------------

---

#PC3201/0.0 #G Start delay : 0.0 mm

#PC3202/0 #G APSF sensor res. : 0 pulses/m

#PC3203/0 #G Start print mode : Pulse falling

#PC3204/0 #G Reprint signal : Disabled

#PC3205/0 #G Feed input : Disabled

#PC3206/0 #G Pause input : Disabled

#PC3207/0 #G Error output : Printer error

#PC3208/0 #G Error polarity : Level low active

#PC3209/1 #G Status output : Low ribbon warn.

#PC3210/0 #G Status polarity : Level low active

#PC3211/0 #G End print mode : Mode0 inactive

#G-------------------------------------------------------------------

---

#G MLI Parameter Menu

#G-------------------------------------------------------------------

---

#PC4002/15 #G Darkness : 15

#PC4003/126 #G Control Prefix : 7EH

#PC4004/94 #G Format Prefix : 5EH

#PC4005/44 #G Delimiter Char : 2CH

#PC4006/0 #G Label Top : 0 Dots

#PC4007/0 #G Left Position : 0 Dots

#PC4009/0 #G Resolution : 300 DPI

#PC4010/0 #G Error Indication : OFF

#PC4011/0 #G Error Checking : YES

#PC4012/0 #G 305 DPI Scaling : YES

#PC4013/0 #G Image Save Path : Internal RAM

#PC4014/1 #G Command ^PR : Enable

#PC4015/1 #G Command ^MT : Enable

#PC4017/0 #G Label Invert : Disable

#PC4016/1 #G Command ^JM : Enable

#G-------------------------------------------------------------------

---

#G Printer Special Menue

#G-------------------------------------------------------------------

---

#PC5001/1 #G *Printer type : AP 5

#PC5002/1 #G *Printhead type : KPA 300 DPI

#PC5004/0 #G Command sequence : ‚#G‘

#PC5005/0 #G EasyPl. file log : Disabled

#G-------------------------------------------------------------------

---

#G Printer Service Menu

#G-------------------------------------------------------------------

---

#PC5111/0 #G Spec parameter 1 : 0

#PC5112/0 #G Spec parameter 2 : 0

#PC5113/0 #G EasyPlug Monitor : Disabled

#PC5125/0 #G EP Monitor Mode : Interpreter data

#PC5116/127 #G *Punch adjust : 127

#PC5117/128 #G *Reflex adjust : 128

#PC5119/234 #G *Foil adjust : 234

#PC5120/170 #G *Head sens adjust : 170

#PC5121/0 #G *Optn.1 : 0

#PC5122/0 #G *Optn.2 adjust : 0

#PC5101/35 #G Matend tolerance : 35 mm

#PC5102/0.0 #G Feed adjust : 0.0 %