User manual

ManualsBrandsAvery Dennison ManualsBusiness equipmentAP5.4 Gen II

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

#G-------------------------------------------------------------------

---

#G Options Parameter

#G-------------------------------------------------------------------

---

#PC5300/0 #G Remote Display : Disabled

#G-------------------------------------------------------------------

---

#G Printer System Menu

#G-------------------------------------------------------------------

---

#PC2001/24.5 #G Head disp dist. : 24.5 mm

#PC2002/0 #G Speed unit : Inch/s

#PC2003/36.4 #G Foil end warning : 36.4 mm

#PC2060/0 #G Foil warn stop : Disabled

#PC2004/0 #G Display mode : Job rest quant.

#PC2005/372 #G *Dispense counter : 372

#PC2006/0 #G w/wo magazine : with

#PC2012/0 #G Print emulation : Easyplug

#PC2013/3 #G Character sets : Germany

#PC2014/0 #G Character filter : Chars >= 20Hex

#PC2015/0 #G Light sens. type : Punched

#PC2016/0 #G Head-sensor dist : 0 mm

#PC2017/50 #G Sens. punch-LS : 50 %

#PC2018/0 #G Foil mode : Thermo transfer

#PC2019/9.9 #G Ribb. eco. limit : 9.9 mm

#PC2058/0 #G Feed mode : Head up

#PC2020/1 #G Turn-on mode : Online

#PC2021/0 #G Interface delay : 0 ms

#PC2022/1 #G Error reprint : Enabled

#PC2023/0 #G Single-job mode : Disabled

#PC2025/1106 #G *Head resistance : 1106 Ohm / 12 Dot

#PC2026/20 #G Temp. reduction : 20 %

#PC2066/1 #G Thin line emphas : On

#PC2027/0 #G Voltage offset : 0 %

#PC2028/1 #G Logo expansion : Yes

#PC2029/0 #G Miss. label tol. : 0

#PC2031/1 #G Periph. device : Cutter

#PC2032/2 #G Infeed module : 2 infeeds

#PC2033/1 #G Singlestartquant : 1

#PC2035/0 #G Application mode : Save mode

#PC2036/0 #G Appl. waitpos. : 0 mm

#PC2037/10 #G Applicator speed : 10 Inch/s

#PC2038/0 #G Start mode : Edge

#PC2039/0 #G Start source : Light barrier

#PC2057/0 #G Calibration mode : Automatic

#PC2042/0 #G External signal : Disabled

#PC2043/0 #G Signal edge : Falling edge

#PC2044/1 #G Apply key : Enabled

#PC2045/99 #G Print contrast : 99 %

#PC2046/512 #G Ram disk size : 512 KBytes

#PC2047/256 #G Font downl. area : 256 KBytes

#PC2048/1024 #G Free store size : 1024 KBytes

#PC2049/2 #G Print info mode : Compact right

#PC2050/0 #G Reprint function : Disabled

#PC2051/1 #G Language : English

#PC2063/1 #G Keyboard : English

#PC2053/0 #G Access authoriz. : Deactivated

#PC2059/80 #G Max InitFeedback : 80 mm

#PC1026/0 #G Material feed : for- / backwards