User manual

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

Storing settings on memory card

1. Call parameter SPECIAL FUNCTION > Parameter to CF.

¯ AP 5.4 black, AP 5.6: Call SPECIAL FUNCTION > Store parameters.

¯ This parameter is only visible, if a memory card is plugged into the print-

er card slot.

2. Select a storing option: „With adjust para“ or „Without adj. par“.

– „With adjust para“

(Default setting) Parameters, which carry device specific settings, are

also saved. Examples for this type of settings are the printhead resist-

ance and the sensor settings.

The relevant parameter names are marked with a „* “ in the setup file.

This option is recommended, if the settings are supposed to be rein-

stalled on the same printer.

– „Without adj. par“

Parameters, which carry device specific settings, are not saved.

This option is recommended, if settings are supposed to be transferred

to another printer of the same type.

3. After having chosen the storing option, the default file name is displayed

(storing location: directory \FORMATS on CF card):

– SETUPALL.FOR for SPECIAL FUNCTION > Parameter to CF = „With adjust

para“

– SETUP.FOR for SPECIAL FUNCTION > Parameter to CF = „Without adj. par“

¯ File names and directory can be modified with the printer operation buttons

or with a connected keyboard.

¯ If a file with the given name already exists, it will be overwritten without fur-

ther inquiry.

Command ID Parameter name Setting

#G Printer System Menu

#PC2001/24.50 #G Head disp dist. : 24.5 mm

#PC2002/0 #G Speed unit : Inch/s

#PC2003/36.40 #G Foil end warning : 36.4 mm

#PC2004/0 #G Display mode : Job rest quant.

#PC2005/0 #G *Dispense counter : 0

#PC2006/0 #G w/wo magazine : with

#PC2007/0 #G Autom. dot check : Off

#PC2008/10 #G Earliest dottest : after 10 label

#PC2009/0 #G Latest dotcheck : after 0 label

#PC2010/0 #G Dottestarea from : 0 mm

#PC2011/104 #G Dottestarea to : 104 mm

#PC2012/0 #G Print emulation : Easyplug

#PC2013/9 #G Character Sets : IBM

[Tab. 23] Example: Detail of a setup file.