User manual

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

Data transmission with WLAN

Requirements

Suitable printers • AP 5.4, AP 7.t: firmware version 3.00 or higher

• 64-xx, DPM, PEM, ALX 92x, PM 3000: firmware version 5.31 or higher

Revision number

CPU board

• AP 5.4, AP 7.t: at least 3 (A3927-03)

• 64-xx, DPM, PEM, ALX 92x, PM 3000: at least 4 (A6621-04)

« Displaying the revision number: SERVICE DATA > CPU BOARD DATA >

CPU identifier

WLAN CF cards

• D-Link „DCF-660W“ (article number A7456)

• Linksys „WCF12“ (no longer availabe)

• Pretec „OC-WLBXX-A“ (no longer availabe) [10A]

[10] WLAN CF card (A) ; Wireless Access Point (B)

Further requirements • Access point according to standard IEEE 802.11b station mode „infrastruc-

ture“ (e. g. „Netgear Wireless Access Point WG602“ [10B])

• Ethernet crossed link cable (1:1 cable), to connect the access point to the

host computer

• PC with operating system Windows XP

Notes

WLAN = Wireless Local Area Network

This section describes a simple setup, with which data transmission from a

host computer (e. g. PC) via an access point to a label printer can be testet.

This setup doesn´t suit for real network operation.