User manual

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

Data Transmission with Ethernet

System Requirements

Hardware • Printer

• Ethernet cable: must have quality „Cat. 5E“ and be shielded.

Software

• Firmware:

• Network protocol: TCP/IP

CAUTION! - Unqualified manipulations of a data network can disturb or stop

its proper functioning.

Connecting a device to a network requires network administrator knowledge.

« Consult your network administrator for assistance, if you don´t have know-

ledge on this level!

Printer Feature Ethernet connection by

AP 4.4 – Ethernet connection not possible!

AP 5.4 –

Integrated Ethernet interfaceAP 5.6 –

AP 7.t –

64-xx

Gen. 2

CPU board A2292 with integrated Ethernet in-

terface (optional)

DPM

PEM

ALX 92x

64-xx

Gen. 3 Integrated Ethernet interface

DPM

PEM

ALX 92x

PM 3000 – Integrated Ethernet interface

[Tab. 15] Equippement of the different printer types witih Ethernet interfaces.

Printer Feature Firmware version

64-xx, DPM, PEM, ALX 92x Gen. 2 3.0

64-xx, DPM, PEM, ALX 92x Gen. 3 5.02

PM 3000 -- 5.03n

AP 5.4, AP 5.6, AP 7.t -- alle Versionen

[Tab. 16] Minimum firmware requirement if it is to apply the Ethernet function.