User manual

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications

AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000

Executing printjobs

All input fields are polled, which are defined as such in the print job (see

Example Application  on page 15). Next, the print quantity is requested. As

soon as the print quantity is confirmed (online button), the print job is executed.

From now on, all information about the job is displayed in the "Print control"

console. While the print job is processed, it is started newly in the „Standalone“

console. The input fields are polled again, with the previous entries as default.

Alternating with the first input field, the text „Start next job“ is diplayed.

¯ Each printjob file may contain only one printjob. If any printjob file contains

more than one printjobs, only the first printjob is executed.

¯ The new start of the print job can be avoided by setting the parameter SYS-

TEM PARAMETERS > Single job mode to „deactivated“.

¯ Press the Esc button to go back to the file selection.

¯ It's also possible to enter a single „* “ for the print quantity. This makes the

print quantity „endless“.

Executing firmware files

Files with the extension ".S3B" are firmware files. Selecting a firmware file

means starting a firmware download. As this is a fundamental intervention to

the system, firmware files are not executed immediately. The query "Firm-

waredownload ? No/Yes" demands explicit confirmation of the operator.

¯ The same firmware file remamed to the extension „.FOR“ is executed

without querying.

Operation Printer button Keyboard key

Increase by 1 Feed Cursor Up

Decrease by 1

(the predecessor of 0 is 9)

Cut (or Apply) Cursor Down

Enter Online Enter

Delete/Cancel Esc Esc

[Tab. 10] Keys for entering variable data

Operation Printer button Keyboard key

Switch between Yes/No Feed Cursor Up

Switch between Yes/No Cut (or Apply) Cursor Down

Confirm the selection Online Enter

More than one file: jump back to

the first file in the list

Esc Esc

[Tab. 11] Keys for loading firmware files