User manual

03/10 Rev. 5.04-02 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000
12
The following message appears after selecting a printjob:
„Avery.for“ = printjob file
The point after „Executing“ moves as long as the interpreter works.
Afterwards, input data are requested. If no input fields are provided, only
the print amount is queried:
The initial print amount is set in the printjob.
4. Change the print
5. Press the buttons Online+Esc to get back to the Online mode.
Key/button functions
Quick selection
¯ If an external keyboard is connected, the file can be selected by typing in
the first letter of the file name.
Example:
After changing to the standalone mode, the following is displayed:
„Avery.for“ stands for any printjob file, which is stored in the „FORMATS“ fold-
er.
1. Press the key for the first letter of the wanted file name , e. g. „D“. Display:
D stands for the typed-in character.
„Default.for“ is in alphabetical order the first file with a „D“ as first letter.
2. Press the enter key to select the file, or
Press the esc key to undo the input.
Avery.for
Executing .
Enter quantity
1
Operation Printer button Keyboard key
Go to previous file Feed Cursor Up
Go to next file Cut (or Apply) Cursor Down
Confirm the selection Online Enter
More than one file: jump back to
the first file in the list
Esc Esc
[Tab. 9] Keys for file selection
Choose a file
Avery.for
D
Default.for