User manual

05/04 Rev. 1.2-03 USER MANUAL Setup & Operation
AP4.4 – AP5.4
5
Fig. 6: These housing parts are shipped loose with the „AP 5.4 Dispenser“.
Removing the Transportation Lock
1. Open the printer lid.
2. Remove the cable tie holding the printhead in place (see Fig. 7). For this,
use side-cutting pliers or strong scissors.
¯ CAUTION! Do not use a knife to cut the cable tie! The printhead could be
damaged by the resulting force when splitting the tie!
Fig. 7: AP 4.4/5.4 transportation lock (1).
AP 5.4 Dispen-
ser
« Remove the connector from its transport position at the printer bottom and
connect it to the connector at the frontside of the printer.
