User manual
05/04 Rev. 1.2-03 USER MANUAL Setup & Operation
AP4.4 – AP5.4
3
Check the Delivery
You are bound to want to start using your new AP 4.4/5.4 as soon as possi-
ble. However, we would ask you to take a few minutes to check the following:
« Please ensure that the printer has not been damaged in transit. If the pak-
kaging has been dented or torn, please check the contents particularly care-
fully for damage that may have resulted from transportation.
« Are the following articles listed included in the box?
Fig. 3: The following items are delivered with the AP 4.4/5.4.
• AP 4.4/5.4 Printer
• Power supply cable (1)
The plug for the power supply is different depending on the country of
delivery.
• Data cable (2)
Centronics IEEE 1284 CA Cable 2 m. The cable connector for the printer is a
type C connector!
• Core adapters (3)
There are two core adapters each for the material rolls with a core internal
diameter of 76.2 mm (3”) and 101.4 mm (4”). On delivery, the core adapters
are placed on the printer material dispenser.
• Empty foil core (4)
Empty foil core for rewinding the thermotransfer foil. On delivery, the backing
paper is placed on the foil rewind mandrel.
• Documentation CD (5)
Contains extensive instructions on using the printer as well as the Windows
driver, printer firmware and service manual.
• Quick reference guide (6)
Multilingual quick reference guide in print form.
• Size 10 torx screwdriver (7)